Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Manuel d'utilisateur télécharger pdf (Page 21)

Configuring Boot From SAN Using iSCSI-Based Dell Storage Arrays

Configure Integrated Devices in Server BIOS

Make the following changes to ensure that no embedded NICs on the server are enabled for iSCSI boot.

On server restart, press <F2> to enter Setup, and then select Integrated Devices. Make the following

changes:

Integrated RAID Controller Disabled (Disables access to any internal hard drives)

Internal USB Port Off (Prevents a conflict during the Windows 2008 installation process)

Internal SD Card Port Off (Prevents a conflict during the Windows 2008 installation process)

Embedded NICx Enabled (all) Multiple NIC choices will appear in the list. Since we will

be using the Intel NIC for the iSCSI boot path, you must make sure that

all of the embedded NIC choices in this screen are set to Enabled and

not to Enabled with iSCSI Boot or Enabled with PXE Boot.

Page 19

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 36 37

Pas de commentaire

Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Manuel d'utilisateur Page 21