Dell PowerEdge C1100 Manuel d'utilisateur télécharger pdf (Page 64)

64 Installing System Components

• The memory speed of each channel depends on the

memory configuration:

– For single- or dual-rank memory modules:

• One memory module per channel supports up to 1333 MHz.

• Two memory modules per channel supports up to 1067 MHz.

– For quad-rank memory modules:

• One memory module per channel supports up to 1067 MHz.

• Two memory modules per channel are limited to 800 MHz,

regardless of memory module speed.

• If quad-rank memory modules are mixed with single- or dual-rank

modules, the quad-rank modules must be installed in the sockets

with the white release levers.

• If memory modules with different speeds are installed, they operate at the

speed of the slowest installed memory module(s).

Mode-Specific Guidelines

Three memory channels are allocated to each processor. The number

of channels used and the allowable configurations depend on the

memory mode selected.

Optimizer (Independent Channel) Mode

In this mode, all three channels are populated with identical memory

modules. This mode permits a larger total memory capacity but does not

support SDDC with x8-based memory modules.

A minimal single-channel configuration of one 1 GB memory module per

processor is also supported in this mode.

Table 3-1 shows sample memory configurations that follow the appropriate

memory guidelines stated in this section. The samples show identical

memory-module configurations and their the physical and available memory

totals. The tables do not show mixed or quad-rank memory-module

configurations, nor do they address the memory speed considerations

of any configuration.

book.book Page 64 Tuesday, February 26, 2013 11:33 AM

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 139 140

Pas de commentaire

Dell PowerEdge C1100 Manuel d'utilisateur Page 64