Dell PowerEdge M710 Manuel d'utilisateur télécharger pdf (Page 139)

Using the System Setup Program and UEFI Boot Manager 139

System Setup Options

NOTE: The options for the System Setup program change based on the system

configuration.

NOTE: The System Setup program defaults are listed under their respective

options, where applicable.

Option Description

System Time Sets the time on the system's internal clock.

System Date Sets the date on the system's internal calendar.

Memory Settings See "Memory Settings Screen" on page 140.

Processor Settings See "Processor Settings Screen" on page 141.

SATA Settings See "SATA Settings Screen (PowerEdge M610, M610x)" on

page 143.

Boot Settings See "Boot Settings Screen" on page 143.

Integrated Devices See "Integrated Devices Screen" on page 144.

PCI IRQ Assignment Displays a screen to change the IRQ assigned to each of the

integrated devices on the PCI bus, and any installed

expansion cards that require an IRQ.

Serial

Communication

See "Serial Communication Screen" on page 146.

Power Management See "Power Management Screen (PowerEdge M915, M910,

M710, M710HD, M610 and M610x Only)" on page 147.

System Security See "System Security Screen" on page 148.

Keyboard NumLock

(On default)

Determines whether your system starts up with the NumLock

mode activated on 101- or 102-key keyboards (does not apply

to 84-key keyboards).

Report Keyboard

Errors

(Report default)

Enables or disables reporting of keyboard errors during the

POST. Select Report for host systems that have keyboards

attached. Select Do Not Report to suppress all error messages

relating to the keyboard or keyboard controller during POST.

This setting does not affect the operation of the keyboard

itself if a keyboard is attached to the system.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 367 368

Pas de commentaire

Dell PowerEdge M710 Manuel d'utilisateur Page 139