Dell D630 - LATITUDE ATG NOTEBOOK Guide de dépannage télécharger pdf (Page 41)

Back to Contents Page

 Processor Thermal-Cooling Assembly

Dell™Latitude™D630ServiceManual

Removing the Processor Thermal-Cooling Assembly

Replacing the Processor Thermal-Cooling Assembly

Removing the Processor Thermal-Cooling Assembly



1. Follow the instructions in Before You Begin.



2. Remove any installed media bay device (see Media Bay Devices).



3. Remove the hinge cover (see Hinge Cover).



4. Remove the keyboard (see Removing the Keyboard).



5. Remove the palm rest (see Palm Rest).



6. Loosen in consecutive order the four captive screws, labeled "1" through "4," on the assembly.



7. Lift the assembly out of the computer.

Replacing the Processor Thermal-Cooling Assembly



1. Peel the backing off the thermal-cooling pad and adhere the pad to the portion of the thermal-cooling assembly that covers the processor.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface, such as a connector on the back of the computer.

NOTE: The processor thermal-cooling assembly may differ in appearance, depending on your computer configuration. However, the removal procedure is

the same for all assemblies.

captive screws (4)

processor thermal-cooling assembly



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface, such as a connector on the back of the computer.

NOTE: The original pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is replaced,

use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

NOTE: This procedure assumes that you have already removed the processor thermal-cooling assembly and are ready to replace it.

1 2 ... 36 37 38 39 40 41 42 43

Commentaires sur ces manuels

Pas de commentaire

Dell D630 - LATITUDE ATG NOTEBOOK Guide de dépannage Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Carnets de notes Dell D630 - LATITUDE ATG NOTEBOOK