Dell OptiPlex GX1p Manuel d'utilisateur télécharger pdf (Page 24)

NOTICE: When you turn off your computer system, perform an orderly system shutdown using the operating system menu when

possible.

Table 2. Power Button Behavior Under Microsoft Windows 98 and Windows 98 SE Operating Systems With ACPI

* Pressing or holding the power button to shut down the system may result in data loss. Use the power button to shut down the system only if the

operating system is not responding.

Microsoft Windows 95 does not support ACPI. Table 3 shows power button functions for Windows 95 and Windows 98 operating systems that

have the ACPI feature disabled.

Table 3. Power Button Behavior Under Microsoft Windows 95 and Windows 98 (With Dell AutoShutdown Loaded)

* Pressing or holding the power button to shut down the system may result in data loss. Use the power button to shut down the system only if the

operating system is not responding.

Table 4 shows power button functions for Microsoft Windows NT operating systems.

Table 4. Power Button Behavior Under Microsoft Windows NT (With Dell AutoShutdown Loaded)

* Pressing or holding the power button to shut down the system may result in data loss. Use the power button to shut down the system only if the

operating system is not responding.

If the system does not turn off when you press the power button, the system may be hung. Press and hold the power button until the system turns off

completely (this process may take several seconds). Alternatively, press the reset button to reset the system and reboot. If the system is hung and

both buttons fail to function properly, unplug the AC power cable from the computer, wait for it to completely stop running, plug in the AC power

cable, and if it the system does not restart, press the power button to restart the system.

Using the Optional Stand for Vertical Orientation

Dell offers an optional stand that you can attach to the computer for a mini tower (vertical) orientation. Although you can attach (and remove) the

stand at any time with a minimum of system disruption, it is easiest to attach before you set up your computer and connect the back-panel cables.

Attach the stand as follows:

1. Turn the computer onto its right side, so that the drive bays are at the bottom.

2. Fit the stand onto what was the left side of the computer.

Position the stand as shown in Figure 4. Align the large round hole in the stand with the securing button on the side of the cover, and align the

captive thumbscrew in the stand with the screw hole in the cover.

Figure 4. Attaching the Optional Stand for Vertical Orientation

Action

Results

System Turned On

and ACPI Enabled

System in Standby Mode

System Turned Off

Press power button

System goes into standby mode

or turns off (depending on the

operating system setup)

System turns on

Boots and system turns on

Hold power button

for 6 seconds*

System turns off immediately

Boots and system turns on

Action

Results

System Turned On

System in Suspend Mode

System Turned Off

Press power button

System turns off

Boots and system turns on

Hold power button for 6 seconds*

System turns off immediately

Boots and system turns on

Action

Results

System Turned On

System Turned Off

Press power button

System shuts down

Bootsandsystemturnson

Hold power button for 6 seconds*

System turns off immediately

Boots and system turns on

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex GX1p Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex GX1p