Dell OptiPlex GX1p Manuel d'utilisateur télécharger pdf (Page 41)

Back to Contents Page

Using the System Setup Program:Dell™OptiPlex™GX1andGX1pMidsizeManaged

PC Systems

Overview

Each time you turn on your computer system or press the reset button, the system compares the hardware installed in the system to the hardware

listed in the system configuration information stored in nonvolatile random-access memory (NVRAM) on the system board. If the system detects a

discrepancy, it generates error messages that identify the incorrect configuration settings. The system then prompts you to enter the System Setup

program to correct the setting.

You can use the System Setup program as follows:

l To change the system configuration information after you add, change, or remove any hardware in your system

l To set or change user-selectable options — for example, the time or date on your system

You can view the current settings at any time. When you change a setting, in many cases you must reboot the system before the change takes

effect.

After you set up your system, run the System Setup program to familiarize yourself with your system configuration information and optional settings.

Dell recommends that you print the System Setup screens (by pressing the <Print Screen> key) or write down the information for future reference.

Before you use the System Setup program, you need to know the kind of diskette drive(s) and hard-disk drive(s) installed in your computer. If you

are unsure of any of this information, see the Manufacturing Test Report that was shipped with your system and is located in the Dell Accessories

folder.



Entering the System Setup Program

Enter the System Setup program as follows:

1. Turn on your system.

If your system is already on, shut it down and then turn it on again.

2. Press <F2> immediately when the F2 = Setup prompt appears in the upper-right corner of the Dell logo screen.

If you wait too long and your operating system begins to load into memory, let the system complete the load operation; then shut down the system

and try again.

You can also enter the System Setup program by responding to certain error messages. See "Responding to Error Messages" at the end of this

chapter.

System Setup Screens

The two System Setup screens, Page 1 and Page 2, display the current setup and configuration information and optional settings for your system.

(Typical examples are illustrated in Figure 1.)

Overview

Using the System Password Feature

Entering the System Setup Program

Using the Setup Password Feature

System Setup Screens

Disabling a Forgotten Password

Using the System Setup Program

Responding to Error Messages

System Setup Options

NOTE: Dell recommends that you upgrade your basic input/output system (BIOS) to the latest version. Refer to the Dell support Web

site at http://support.dell.com for instructions.

NOTE: To ensure an orderly system shutdown, consult the documentation that accompanied your operating system.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex GX1p Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex GX1p