Dell OptiPlex GX1p Manuel d'utilisateur télécharger pdf (Page 27)

Back to Contents Page

ISA Configuration Utility Messages:Dell™OptiPlex™GX1andGX1pMidsizeManaged

PC Systems

Overview

The ISA Configuration Utility (ICU) and its Configuration Manager are capable of identifying problems and alerting you to them. Both utilities can

alert you to problems with card configuration as well as to problems that prevent proper operation of the utility. This section describes each type of

message and lists the possible causes and actions you can take to resolve problems indicated by a message. See the following tables to locate

your message and identify possible corrective actions.

ICU Error Messages

The ICU can display a variety of error messages while in operation. These messages alert you to problems that prevent the ICU from running

correctly and inform you of resource conflicts that prevent the configuration of various cards in your computer. If you receive a message from the

ICU, see the following table for suggestions on resolving problems indicated by the message.

Overview

Configuration Manager Messages

ICU Error Messages

Message

Probable Cause

Corrective Action

Out of memory

Memory allocation failed

Either of these messages can

appear if the system runs out of

memory during operation of the

utility.

Disable any TSR programs or any unneeded device

drivers.

Not enough memory to run the ICU

This message appears when you

start the ICU if the system does not

have enough memory to run the

utility.

Disable any TSR programs or any unneeded device

drivers.

Can't open index file. This file

is required for ICU to run.

The ICU cannot find the index file for

its database.

Make sure to switch to drive A before attempting to start

the utility.

No Configuration Manager.

The device driver needed by the ICU

is corrupted or is not correctly

configured.

Verify that the following device statement appears in

your config.sys file:

device=drive:\directory\

drivers\dos\dwcfgmg.sys

In this statement, drive and directory represent the drive

and directory where the driver resides. The default is

c:\plugplay.

At least one Plug and Play card

in your system is not configured

due to conflicts. These are

marked "config err" in the list

of configured cards.

Due to conflicts, the ICU could

only configure some Plug and

Play cards in your system.

Unconfigured cards are marked

"config err" in the list of

configured cards.

The Configuration Manager or the

ICU cannot configure at least one

Plug and Play expansion card

because of resource conflicts with

one or more cards.

You must reconfigure the conflicting card(s). To find the

conflicting card, perform the following steps:

1. Select the Plug and Play expansion card

marked with config err, and then click the

Modify button.

The Card Configuration dialog box displays the

functions assigned to the Plug and Play expansion

card.

2. Select a function and then click Settings. Click

Cancel if the ICU does not display a message

naming the conflicting card.

3. Repeat step 2 until the ICU displays a

message box naming the conflicting card and

the resource(s) in conflict. See the following

table entry for an explanation of this message

box.

This device is unconfigurable

because of a resource conflict

The selected card is unconfigurable

because one of its resources is

Perform the following procedure:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex GX1p Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex GX1p