Dell XPS 710 Manuel d'utilisateur télécharger pdf (Page 54)



5. Slide the drive release latch towards the base of the computer to release the shoulder screw, and then slide the drive out of the drive bay.



6. Replace the drive panel (see Replacing the Drive Panel).



7. Replace the computer cover (see Replacing the Computer Cover).



8. Connect the computer and devices to electrical outlets, and turn them on.



Installing a Floppy Drive



1. Follow the procedures in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the drive panel (see Removing the Drive Panel).



4. Remove the existing floppy drive, if applicable (see Removing a Floppy Drive).



power cable

floppy drive data cable

drive release latch

floppy drive

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 104 105

Pas de commentaire

Dell XPS 710 Manuel d'utilisateur Page 54