Dell 360 Manuel d'utilisateur Page 99

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 160
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 98
Processor 99
11
Processor
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION: Do not perform the following steps unless you are familiar with
hardware removal and replacement. Performing these steps incorrectly could
damage your system board.
Removing the Processor
1
Follow the procedure in "Before Working on Your Computer" on page 9.
2
Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19 or "Removing the Desktop Computer Cover" on
page 21).
WARNING: Despite having a plastic shield, the heat sink assembly may be very
hot during normal operation. Allow sufficient time for it to cool before touching it.
3
Remove the processor heat-sink assembly from the computer (see
"Removing the Processor Heat-Sink Assembly" on page 85).
NOTE: Unless a new heat sink is required for the new processor, reuse the
original heat sink assembly when you replace the processor.
Vue de la page 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 159 160

Commentaires sur ces manuels

Pas de commentaire