Dell W-IAP93 Guide de l'utilisateur télécharger pdf (Page 37)

Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 37

Figure 25 Band and Hide SSID Settings

4. Click Next and set appropriate security levels using the slider button in the Security tab. Default selection is

Personal. Available options are Enterprise, Personal, and Open.

Table 6 Conditions for Adding an Employee Network - Security Tab

If then,

You select the Enterprise security level Perform the following steps:

1. Select the required key options from the Key management drop-

down list. Available options are:

 WPA-2 Enterprise

 WPA Enterprise

 Both (WPA-2 & WPA)

 Dynamic WEP with 802.1x

2. Select the required Authentication server option from the

Authentication server 1drop-down list. Available options are:

 External - If you select this option, then an external radius server

has to be configured to authenticate the users. For information

on configuring an external RADIUS server, see Chapter 9,

“Authentication” .

 Internal Server- If you select this option, then users who are

required to authenticate with the internal RADIUS server must

be added. Click the Users link to add the users.

For information on adding a user, see “Adding a User” on page 133.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 139 140

Pas de commentaire

Dell W-IAP93 Guide de l'utilisateur Page 37