Dell W-IAP93 Guide de l'utilisateur télécharger pdf (Page 51)

Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Mesh Network | 51

Figure 36 Login Window

6. Create a new SSID and wpa-2 personal keys with unrestricted or network based access rules. Select any permit

for basic connectivity.

7. Connect a client to the new SSID and disconnect from the instant SSID.

8. All the IAPs will show up on the Virtual Controller as shown in. Disconnect the IAPs that you want to deploy

as Mesh Points from the switch and place the IAPs at the desired location. The wired IAPs are Mesh Portals.

Figure 37 Mesh Portal

NOTE: The IAPs in US, JP, or IL regulatory domain which are in factory default state will scan for several minutes after booting.

These IAPs will automatically join the mesh if only a single provisioned Instant mesh network is available.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 139 140

Pas de commentaire

Dell W-IAP93 Guide de l'utilisateur Page 51