Dell W-IAP93 Guide de l'utilisateur télécharger pdf (Page 74)

74 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide

 Prompt

 Rad-Authenticator

 Rad-Code

 Rad-Id

 Rad-Length

 Reply-Message

 Revoke-Text

 Server-Group

 Server-Name

 Service-Type

 Session-Timeout

 Simultaneous-Use

 State

 Strip-User-Name

 Suffix

 Termination-Action

 Termination-Menu

 Tunnel-Assignment-Id

 Tunnel-Client-Auth-Id

 Tunnel-Client-Endpoint

 Tunnel-Connection-Id

 Tunnel-Medium-Type

 Tunnel-Preference

 Tunnel-Private-Group-Id

 Tunnel-Server-Auth-Id

 Tunnel-Server-Endpoint

 Tunnel-Type

 User-Category

 User-Name

 User-VLAN

 Vendor-Specific

Management Authentication Settings

To authenticate the Virtual Controller Management UI, perform the following steps:

1. Click the Settings link.

2. Select the Admin tab.

3. In the Authentication drop-down list, select any one of the following:

 Internal - Select the Username and Password specified in the respective text boxes to access the Virtual

Controller Management UI.

 RADIUS Server - Specify one or two radius servers to authenticate UI. If two servers are configured users can

use them in primary/backup mode or load-balancing mode, this is identical to the radius server configuration

for SSIDs. For information on configuring external RADIUS server, see “External RADIUS Server” on

page70.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 139 140

Commentaires sur ces manuels

Pas de commentaire

Dell W-IAP93 Guide de l'utilisateur Page 74

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Dell W-IAP93