Dell Dimension 9200 Manuel d'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 63
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
b. Connect the network cable to the add-in network adapter connectors. Do not connect the network cable to the integrated connector on the back
panel.
17. Install any drivers required for the card as described in the card documentation.
Removing a PCI Card
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
4. Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.
5. Remove the card driver from the operating system.
6. If you removed a sound card:
a. Enter system setup, select Integrated Audio Controller,andthenchangethesettingtoOn.
b. Connect external audio devices to the audio connectors on the back panel of the computer.
7. If you removed an add-in network connector:
a. Enter system setup, select Integrated NIC Controller,andthenchangethesettingtoOn.
b. Connect the network cable to the integrated connector on the back panel of the computer.
PCI Express Cards
Your computer supports:
l One PCI Express x1 card
l One PCI Express x16 card
l One PCI Express x4 card
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not replacing a card, see Removing a
PCI Express Card.
If you are replacing a card, remove the current driver for the card from the operating system.
If you are installing or replacing a PCI card, see Installing a PCI Card.
Installing a PCI Express Card
1. Follow the procedures in Before You Begin.
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust
and dirt out of your computer.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 62 63

Commentaires sur ces manuels

Pas de commentaire