Dell UPS 1000T Manuel d'utilisateur télécharger pdf (Page 106)

ULNM with VMware ESX Server 4.0 /4.1 106

Dell ULNM Network Configuration Prerequisites

All hardware elements must have an operational network configuration that allows free dialog between

them. Connections through the following ports must be authorized within the firewall of the main

operating system:

• Connections on tcp port 4679 and 4680 to enable a remote access for supervision and configuration

through Web browser. These ports are reserved at IANA (http://www.iana.org/).

• Connections through TCP port 80 must be opened as a destination port (for output) on the machine

hosting Dell ULNM

In order to enable communication between Dell ULNM and the Dell Network Management Card

(command line for firewall):

esxcfg-firewall -o 4679,tcp, in,DELLhttp

esxcfg-firewall -o 4680,tcp, in,DELLhttps

esxcfg-firewall -o 80,tcp,out,http

esxcfg-firewall -o 5000,tcp,out,DELLinit

esxcfg-firewall -o 4679,udp, in,DELLhttpU

esxcfg-firewall -o 4680,udp, in,DELLhttpsU

• In order to enable communication between Dell ULNM and the Dell UPS Network Management Card

(command line for firewall 2):

esxcfg-firewall -o 161,udp, in,DELL-ULNM

esxcfg-firewall -o 200,udp, in,DELL-ULNM

esxcfg-firewall -o 2844,udp, in,DELL-ULNM

esxcfg-firewall -o 2845,udp, in,DELL-ULNM

esxcfg-firewall -o 161,udp,out,DELL-ULNM

esxcfg-firewall -o 200,udp,out,DELL-ULNM

esxcfg-firewall -o 2844,udp,out,DELL-ULNM

esxcfg-firewall -o 2845,udp,out,DELL-ULNM

NOTE:

To configure the VMware ESX Server for the network, please refer to the VMware ESX user’s manual.

0120_3-Dell ULNM UG.book Page 106 Saturday, November 2, 2013 5:34 PM

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 146 147

Pas de commentaire

Dell UPS 1000T Manuel d'utilisateur Page 106