Dell UPS 1000T Manuel d'utilisateur télécharger pdf (Page 40)

Configuration 40

Click

Save.

Figure 21. Edit UPS Configuration Dialog Box

The Edit UPS Configuration dialog box is available for some UPSs connected through USB or serial.

Otherwise, the parameters are displayed as “read only” through the network or if the UPS does not

support this feature.

You can configure following UPS parameters:

• Low Battery alarm level

• Load Segment restart delays

•Audible alarm

Test Access

Test access checks if the login and password are correctly configured so that:

• Dell ULNM can update his shutdown configuration on the card

• Dell ULNM can remotely access to the Dell ULNM Shutdown Controller

Test Shutdown

Test shutdown starts a shutdown procedure according to the Dell ULNM parameters.

WARNING:

This action will launch the entire shutdown sequence, including the UPS shut off.

0120_3-Dell ULNM UG.book Page 40 Saturday, November 2, 2013 5:34 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 146 147

Pas de commentaire

Dell UPS 1000T Manuel d'utilisateur Page 40