1. Follow the instructions in Before You Begin.
2. Replace the speaker (see Replacing the Speakers).
3. Align the slots on the middle frame with the connectors on the system board.
4. Align the screw holes on the middle frame with the screw holes on the chassis.
5. Replace the 13 screws that secure the middle frame to the chassis.
6. Route the cables through the routing guides on the middle frame.
7. Route the speaker cable through the routing guides and connect the speaker cable to the connector (CN10) on the system board.
8. Replace the system-board shield (see Replacing the System-Board Shield).
9. Replace the rear stand cover (see Replacing the Rear Stand Cover).
10. Follow the instructions from step 4 to step 7 in Replacing the Front Stand.
11. Follow the instructions from step 5 to step 7 in Replacing the Optical Drive.
12. Replace the back cover (see Replacing the Back Cover).
13. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Commentaires sur ces manuels