Dell PowerEdge M805 Manuel d'utilisateur télécharger pdf (Page 150)

100

101

116 Address Table Commands

www.dell.com | support.dell.com

•

discard

—Discards frames with unlearned source addresses. This is the default if no

option is indicated.

•

discard-shutdown

—Discards frames with unlearned source addresses. The port is also

shut down.

•

trap

seconds

—Sends SNMP traps and defines the minimal amount of time in seconds

between two consecutive traps. (Range: 1 - 1000000)

Default Configuration

Disabled

- No port security

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

User Guidelines

When port security is enabled on an interface, all dynamic entries learned up to that point are

flushed, and new entries can be learned only to the limit set by the

port security max

command. The default limit is 100 dynamic MAC addresses.

Example

In this example, frame forwarding is enabled without learning, and with traps sent every 100

seconds on port g1.

console(config)#interface ethernet 1/g1

console(config-if-1/g1)#port security forward trap 100

port security max

Use the

port security max

command in Interface Configuration mode to configure the maximum

addresses that can be learned on the port while the port is in port security mode. To return to the

system default, use the

form of this command.

Syntax

port security max

max-addr

no port security max

• max-addr

—The maximum number of addresses that can be learning on the port. (Range:

0- 100)

Default Configuration

The default value for this command is 100.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 807 808

Commentaires sur ces manuels

Pas de commentaire

Dell PowerEdge M805 Manuel d'utilisateur Page 150

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell PowerEdge M805