
IGMP Commands 601
console#interface vlan 15
console(config-if-vlan15)#ip igmp version 2
show ip igmp
Use the
show ip igmp
command in Privileged EXEC mode to display system-wide IGMP
information.
Syntax
show ip igmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide IGMP information .
console#show ip igmp groups vlan 2
IP Address..................................... 1.1.1.1
Subnet Mask.................................. 255.255.255.0
Interface Mode............................... Enable
Querier Status................................ Querier
show ip igmp groups
Use the
show ip igmp groups
command in Privileged EXEC mode to display the registered
multicast groups on the interface. If
detail
is specified, this command displays the registered
multicast groups on the interface in detail.
Syntax
show ip igmp groups vlan
vlan-id
[detail]
•
vlan-id
—
Valid VLAN ID
Commentaires sur ces manuels