Dell Networking S6000 System Guide d'installation télécharger pdf (Page 27)

Install the S6000 | 27

Installing the S6000 System

You can mount the system in the 1U front-rack or 1U two-post (flush and center) configurations. The

following is an example of a front-rack configuration. For the 1U two-post (flush and center)

configurations, slide the system into the rails in the same manner as the four-post configurations.

Installing a 1U Front-Rack

You must configure the rails that are attached to the system.

Step Task

1 Attach the switch rails (inner chassis members) to the S6000 system.

Figure 4-5

, item 3 shows the detail for the

front standoff with the locking tab.

Figure 4-5. Attaching the Switch Rails

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Pas de commentaire

Dell Networking S6000 System Guide d'installation Page 27