Dell Networking S6000 System Guide d'installation télécharger pdf (Page 39)

Management Ports | 39

Management Ports

Besides the 10 Gigabit and 40 Gigabit switch ports, the S6000 provides several ports for management and

storage.

Accessing the RS-232 Console Port

NOTE: Before starting this procedure, be sure that your PC has a 9-pin serial port and that you have a

terminal emulation program already installed and running on the PC.

NOTE: If your PC’s serial port cannot accept a female DB-9 connector, acquire a DB-9 male-to-male adaptor.

The RS-232 console port is located (and labeled) on the I/O-side of the S6000 chassis (see

Figure 7-1

Figure 7-1. Location of Console Port

1 - RS-232 console port

To access the console port, follow these steps:

Step Task

1 Install the provided RJ-45 connector side of the provided copper cable into the S6000 console port.

2 Install the DB-9 female side of the provided copper cable into your PC’s serial port (or into other DTE terminal

server hardware that you intend to use).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Pas de commentaire

Dell Networking S6000 System Guide d'installation Page 39