Dell OpenManage Server Administrator Version 5.4 Manuel d'utilisateur télécharger pdf (Page 114)

112 omconfig: Managing Components Using the Instrumentation Service

Table 4-30 shows the valid parameters for the command.

Example Thermal Shutdown Commands

To trigger a thermal shutdown when a temperature probe detects a failure

event, type:

omconfig system thrmshutdown severity=failure

omconfig servermodule thrmshutdown severity=

failure

To disable thermal shutdown so that an administrator has to initiate an

omconfig system shutdown, type:

omconfig system thrmshutdown severity=disabled

omconfig servermodule thrmshutdown severity=

disabled

Table 4-30. Thermal Shutdown Parameters

name=value

pair

Description

severity=

disabled |

warning |

failure

disabled: Disable thermal shutdown. An administrator must intervene.

warning: Perform a shutdown when a temperature warning event is detected.

A warning event occurs when any temperature probe inside a chassis reads a

temperature (in degrees Celsius) that exceeds the maximum temperature

warning threshold value.

failure: Perform a shutdown when a temperature failure event is detected.

A failure event occurs when any temperature probe inside a chassis reads a

temperature (in degrees Celsius) that exceeds the maximum temperature

failure threshold value.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 257 258

Pas de commentaire

Dell OpenManage Server Administrator Version 5.4 Manuel d'utilisateur Page 114