Dell OpenManage Server Administrator Version 5.4 Manuel d'utilisateur télécharger pdf (Page 167)

Using the Storage Management Service 165

omconfig Unmirror

Use the following omconfig command syntax to separate mirrored data and

restore one half of the mirror to free space. Unmirroring a RAID-1 or

RAID-1–concatenated virtual disk results in a single, non-redundant

concatenated virtual disk. Unmirroring a RAID-10 virtual disk results in a

single, non-redundant RAID-0 (striped) virtual disk. Data is not lost during

this operation. See Dell OpenManage Online Help for more information

about Unmirror.

Complete Syntax

omconfig storage vdisk action=unmirror controller=

id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport

command. To obtain these values, enter omreport storage controller to

display the controller IDs and then enter omreport storage vdisk controller=ID

to display the IDs for the virtual disks attached to the controller.

Example Syntax

To unmirror virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=unmirror controller=1

vdisk=4

omconfig Assign Dedicated Hot Spare

Use the following omconfig command syntax to assign one or more physical

disks to a virtual disk as a dedicated hot spare.

NOTE: The PERC 2/SC, 2/DC, and CERC SATA 1.5/2s controllers do not support

dedicated hot spares.

Complete Syntax

omconfig storage vdisk action=

assigndedicatedhotspare controller=id vdisk=id

pdisk=<PDISKID> assign=yes

where id is the controller ID and virtual disk ID. The <PDISK> variable

specifies the physical disk.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 257 258

Pas de commentaire

Dell OpenManage Server Administrator Version 5.4 Manuel d'utilisateur Page 167