Dell OpenManage Server Administrator Version 5.4 Manuel d'utilisateur télécharger pdf (Page 182)

180 Using the Storage Management Service

omconfig Unassign Global Hot Spare

Use the following omconfig command syntax to unassign a physical disk as a

global hot spare.

Complete Syntax

omconfig storage pdisk action=assignglobalhotspare

controller=id pdisk=<PDISKID> assign=no

where id is the controller ID. The <PDISK> variable specifies the physical disk.

To obtain these values, enter omreport storage controller to display the

controller IDs and then enter omreport storage pdisk controller=ID to

display the IDs for the physical disks attached to the controller.

Example Syntax

In this example, you want to unassign physical disk 3 on connector 0 of

controller 1 as a global hot spare. On a SAS controller, the physical disk

resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers

To unassign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:3 assign=no

Example for SAS Controllers

To unassign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:2:3 assign=no

omconfig Rebuild Physical Disk

Use the following omconfig command syntax to rebuild a failed physical disk.

Rebuilding a disk may take several hours. If you need to cancel the rebuild,

use the Cancel Rebuild task. See Dell OpenManage Online Help for more

information about Rebuild Physical Disk.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 257 258

Pas de commentaire

Dell OpenManage Server Administrator Version 5.4 Manuel d'utilisateur Page 182