Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 182)

100

101

182 | rft Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide

rft

rft test profile

antenna-connectivity ip-addr <IP-addr> dest-mac <MAC-addr> phy {a|g}

ht-link-quality ip-addr <IP-addr> dest-mac <MAC-addr> phy {a|g} mcs <mcs>

link-quality ip-addr <IP-addr> dest-mac <MAC-addr> phy {a|g}

raw ip-addr <IP-addr> dest-mac <MAC-addr> phy {a|g}

Description

This command is used for RF troubleshooting.

Syntax

Parameter Description

rft test profile

Allows you to run RF troubleshooting commands

antenna-connectivity

Allows you to test the antenna connectivity

ht-link-quality

Allows you to test the HT link quality.

link-quality

Allows you to test the quality of the link.

raw

Performs a raw test.

ip-addr <IP-addr>

Indicates the IP address of the W-IAP that performs the test.

dest-mac <MAC-addr>

Specifies MAC address of the client to be tested.

phy

Indicates the 802.11 type, either a or g.

mcs <mcs>

Indicates the type of Modulation Coding Scheme (MCS).

Usage Guidelines

This command can run predefined test profiles for antenna connectivity, link quality, or raw testing. Run these

commands only under the supervision of a Dell support representative.

In this release, this command is not available on W-IAP224/225, and W-IAP274/275 platforms.

Example

The following example shows the RF test command that can be run for testing the antenna connectivity:

(Instant AP)# rft test profile 192.0.2.1 dest-mac 00:1A:1E:00:00:00 phy a

Command History

Version Description

Dell Networking W-Series Instant

6.4.0.2-4.1

This command is introduced.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Dell W-IAP103 Guide de l'utilisateur Page 182

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Dell W-IAP103