Dell W-IAP103 Guide de l'utilisateur Page 573

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 576
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 572
573 | Terminology Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Abbreviation Expansion
PEAP Protected Extensible Authentication Protocol
PEM Privacy Enhanced Mail
PoE Power over Ethernet
RADIUS Remote Authentication Dial In User Service
VC Virtual Controller
VSA Vendor-Specific Attributes
WLAN Wireless Local Area Network
Table 11:
List of abbreviations
Glossary
The following table lists the terms and their definitions used in this document.
Term Definition
802.11 An evolving family of specifications for wireless LANs developed by a
working group of the Institute of Electrical and Electronics Engineers
(IEEE). 802.11 standards use the Ethernet protocol and CSMA/CA (carrier
sense multiple access with collision avoidance) for path sharing.
802.11a Provides specifications for wireless systems. Networks using 802.11a
operate at radio frequencies in the 5GHz band. The specification uses a
modulation scheme known as orthogonal frequency-division multiplexing
(OFDM) that is especially well suited to use in office settings. The
maximum data transfer rate is 54 Mbps.
802.11b WLAN standard often called Wi-Fi; backward compatible with 802.11.
Instead of the phase-shift keying (PSK) modulation method historically
used in 802.11 standards, 802.11b uses complementary code keying
(CCK), which allows higher data speeds and is less susceptible to
multipath-propagation interference. 802.11b operates in the 2.4 GHz band
and the maximum data transfer rate is 11 Mbps.
802.11g Offers transmission over relatively short distances at up to 54 Mbps,
compared with the 11 Mbps theoretical maximum of 802.11b. 802.11g
operates in the 2.4 GHz band and employs orthogonal frequency division
multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain
higher data speed. Computers or terminals set up for 802.11g can fall
back to speeds of 11 Mbps, so that 802.11b and 802.11g devices can be
compatible within a single network.
802.11n Wireless networking standard to improve network throughput over the two
previous standards 802.11a and 802.11g with a significant increase in the
maximum raw data rate from 54 Mbps to 600 Mbps with the use of four
spatial streams at a channel width of 40 MHz. 802.11n operates in the 2.4
and 5.0 bands.
Table 12:
List of Terms
Vue de la page 572
1 2 ... 568 569 570 571 572 573 574 575 576

Commentaires sur ces manuels

Pas de commentaire