Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 395)

100

101

show l2tpv3 config

Description

This command displays the L2TPV3 session and tunnel configuration details.

Usage Guidelines

Use this command to view the tunnel and session configuration details.

Example

The following example shows the output of the show l2tpv3 config command:

(Instant AP)# show l2tpv3 config

L2TPV3 Tunnel configuration

---------------------------

Tunnel Profile Primary Peer Backup Peer Peer UDP Port Local UDP Port Hello Interval Host Name

MTU Message Digest Type secret Key Failover Mode Failover Retry Count Retry Interval Checksum

-------------- ------------- ------------ ------------- -------------- -------------- --------

- --- ------------------- ---------- ------------- -------------------- -------------- -------

test_tunnel 10.0.0.63 10.0.0.65 3000 1701 150 Instant-C4:42:98 1570 MD5

625beed39fa4ff3424edb3082ede48fa non-preemptive 5 80 Disabled

L2TPV3 Session configuration

----------------------------

Session Name Tunnel Name Local tunnel IP Tunnel Mask Tunnel Vlan Session Cookie Length Session

Cookie Session Remote End ID

------------ ----------- --------------- ----------- ----------- --------------------- -------

------- ---------------------

test_session 1.1.1.1 255.255.255.0 5 0 0 0

The output of this command includes the following information:

Parameter Description

Tunnel Profile

Displays the tunnel profile name.

Primary Peer

Displays the IP address of the remote end tunnel.

Backup Peer

Displays the IP address of the remote end backup tunnel.

Peer UDP Port

Displays the UDP port number of the remote end backup tunnel.

Local UDP Port

Displays the UDP port number of the remote end tunnel.

Hello Interval

Displays the interval (in seconds) at which hello packets are routed in the tunnel.

Host Name

Displays the name of the W-IAP.

MTU

Displays the value for the tunnel MTU.

Message Digest Type

Displays the message digest to be used to create the MD AVP.

secret Key

Displays the shared key used for message digest.

Failover Mode

Displays the backup/primary tunnel failover mode.

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show l2tpv3 config | 395

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Dell W-IAP103 Guide de l'utilisateur Page 395

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Dell W-IAP103