Dell W-IAP103 Guide de l'utilisateur Page 144

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 576
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 143
144 | l2tpv3 session Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
l2tpv3 session
l2tpv3 session <l2tpv3_session_profile>
cookie len <len_of_cookie> value <cookie_val>
default-l2-specific-sublayer
l2tpv3 tunnel <l2tpv3_tunnel_prof_to_associate>
tunnel-ip <local_ip_addr_tunnel> mask <tunnel_mask> vlan <tunnel_mgmt_vlan>
no
Description
This command configures an Layer-2 Tunnel Protocol (L2TP) session profile.
Syntax
Parameter Description Range Default
l2tpv3 session
<name>
Configures the session profile
name.
cookie len <len_
of_cookie> value
<cookie_val>
Configures the length and
alphanumeric value for the
cookie.
Length: 4/8
If cookie length is 4, the
cookie value should
have exactly 8
hexadecimal
characters.
If cookie length is 8, the
cookie value should
have exactly 16
hexadecimal
characters
Not set.
default-l2-
specific-
sublayer
Enables the default l2 specific
sublayer in the L2TPV3 session.
l2tpv3 tunnel
<l2tpv3_tunnel_
prof_to_
associate>
Selects the tunnel profile name
where the session will be
associated.
tunnel <local_
ip_addr_tunnel>
mask <tunnel_
mask> vlan
<tunnel_mgmt_
vlan>
Configures the local IP address,
network mask, and VLAN ID of
the tunnel.
2-4094
no
Removes the configuration.
Usage Guidelines
Use this command to configure the session to carry the L2TP data.
Example
The following example configures the L2TPv3 session:
(Instant AP)(config) # l2tpv3 session test_session
(Instant AP)(L2TPv3 Session Profile "test_session")# cookie len 4 value 12345678
Vue de la page 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 575 576

Commentaires sur ces manuels

Pas de commentaire