Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 473)

100

101

eth0 UP 0 Yes

Wifi-sta INIT 6 No

3G/4G INIT 7 No

Internet failover :disable

Max allowed test packet loss:10

Secs between test packets :30

VPN failover timeout (secs) :180

ICMP pkt sent :0

ICMP pkt lost :0

Continuous pkt lost :0

VPN down time :0

The output of this command provides the following information:

Column Description

Uplink preemption

Indicates if the uplink preemption is enabled.

Uplink enforce

Indicates if any uplinks are enforced.

Ethernet uplink eth0

Indicates if Ethernet uplink is configured.

Type

Indicates the type of the uplink.

State

Indicates the uplink status.

Priority

Indicates if any priority levels are assigned to the uplink.

In Use

Indicates if the uplink is in use.

Max allowed test packet loss

Indicates an allowed number of test packets that can be lost verifying

the Internet availability.

Secs between test packets

Indicates the frequency at which the test packets are sent to verify the

Internet availability.

VPN failover timeout (secs)

Indicates the number of seconds to wait, before trying a different uplink

when a VPN tunnel is down.

ICMP pkt sent

Indicates the number of ICMP packets sent to verify the Internet

availability for uplink switchover.

ICMP pkt lost

Indicates the number of ICMP packets lost.

Continuous pkt lost

Indicates if the packets are lost continuously.

VPN down time

Indicates the time since the VPN connection is unavailable.

Command History

Version Description

Dell Networking W-Series

Instant 6.2.1.0-3.3

This command is introduced.

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show uplink | 473

1 2 ... 468 469 470 471 472 473 474 475 476 477 478 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Dell W-IAP103 Guide de l'utilisateur Page 473

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Dell W-IAP103