Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 535)

Command/Parameter Description Range Default

rules.

rule

Creates an access rule.

You can create up to 128 access

control entries in an ACL for a user

role. However, it is recommended to

delete any existing configuration and

apply changes at regular intervals.

— —

<dest>

Allows you to specify the destination IP

address.

— —

<mask>

Specifies the subnet mask for the

destination IP address.

— —

<match>

l match—Indicates if the rule specific

to the destination IP address and

subnet mask matches the value

specified for protocol.

l invert— Indicates if the rule allows

or denies traffic with an exception

to the specified destination IP

address and subnet mask.

match

invert

—

<protocol>

Configures any of the following:

l Protocol number between 0-255

l any: any protocol

l tcp: Transmission Control Protocol

l udp: User Datagram Protocol

1-255 —

<sport>

Specifies the starting port number from

which the rule applies.

1-65534 —

<eport>

Specifies the ending port number until

which the rule applies

1-65534 —

dst-nat

Allows the W-IAP to perform

destination NAT on packets.

— —

src-nat

Allows the W-IAP to perform source

NAT on packets. When configured, the

source IP changes to the outgoing

interface IP address (implied NAT

pool) or from the pool configured

(manual NAT pool).

— —

<dst-nat-IP-address>

Specifies the destination NAT IP

address for the specified packets when

dst-nat action is configured.

— —

<dst-nat-port>

Specifies the destination NAT port for

the specified packets when dst-nat

action is configured.

— —

app <app>

Specifies a rule to allow or deny

access to a specific type of application.

To view the list —

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide wlan access-rule | 535

1 2 ... 530 531 532 533 534 535 536 537 538 539 540 ... 575 576

Commentaires sur ces manuels

Pas de commentaire