wlan tacacs-server
wlan tacacs-server <profile-name>
ip <IP-address>
port <port>
key <key>
timeout <seconds>
retry-count <number>
deadtime <minutes>
no...
Description
This command is used to configure a TACACSserver for management users.
Syntax
Command/Parameter Description Default
wlan tacacs-server
Configures the TACACS server profile. -
ip <IP-address>
Configures the IP address of the TACACS
server.
-
port <port>
Configures the TCP port for the server 49
key
Configures a shared secret key to authenticate
communication between the TACACS+ client
and server.
-
timeout <seconds>
Configures a timeout value for TACACS+
requests from the management users
20
retry-count <number>
Configures the maximum number of
authentication requests that are sent to the
server
3
no…
Removes the specified configuration
parameter.
—
Usage Guidelines
Use this command to configure a TACACS server as an external authentication server. This configuration applies
only for management users in Instant and not for the other SSIDor wired profiles.
Example
The following example configures the TACACS protocols:
(Instant AP)(config)# wlan tacacs-server Server1
(Instant AP)(TACACS Server < Server1>) # ip <10.17.121.54>
(Instant AP)(TACACS Server <Server1>) # port <49>
(Instant AP)(TACACS Server <Server1>) # key <pass123>
(Instant AP)(TACACS Server <Server1>) # timeout <30>
(Instant AP)(TACACS Server <Server1>) # retry-count <4>
(Instant AP)(TACACS Server <Server1>) # deadtime <30>
(Instant AP TACACS Server <Server1>) # end
(Instant AP)# commit apply
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide wlan tacacs-server | 563
Commentaires sur ces manuels