Dell W-IAP103 Guide de l'utilisateur Page 179

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 576
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 178
Parameter Description Range Default
interference related to 2.4 GHz appliances
such as cordless phones.
l Level 4 Level 3 settings, and FIR
immunity. At this level, the AP adjusts its
sensitivity to in-band power, which can
improve performance in environments with
high and constant levels of noise
interference.
l Level 5 The AP completely disables PHY
error reporting, improving performance by
eliminating the time the W-IAP would spend
on PHY processing.
NOTE: Increasing the immunity level makes
the AP to lose a small amount of range.
legacy-mode
Enables the W-IAPs to run the radio in non-
802.11n mode.
Disabled
max-distance <count>
Configures the maximum distance between a
client and an AP or between a mesh point and
a mesh portal in meters. This value is used to
derive ACK and CTS timeout times.
A value of 0 specifies the default settings for
this parameter, where timeouts are only
modified for outdoor mesh radios which use a
distance of 16km.
600-1000 0
spectrum-monitor
Allows the W-IAPs in access mode to continue
with normal access service to clients, while
performing additional function of monitoring RF
interference (from both neighboring APs and
non Wi-Fi sources such as, microwaves and
cordless phones) on the channel they are
currently serving clients.
Disabled
no
Removes the configuration.
Usage Guidelines
Use this command to create a 2.4 GHz radio profile on a W-IAP.
Example
The following example configures the 2.4GHz radio profile:
(Instant AP)(config)# rf dot11g-radio-profile
(Instant AP)(RF dot11g Radio Profile)# beacon-interval 200
(Instant AP)(RF dot11g Radio Profile)# no legacy-mode
(Instant AP)(RF dot11g Radio Profile)# dot11h
(Instant AP)(RF dot11g Radio Profile)# interference-immunity 3
(Instant AP)(RF dot11g Radio Profile)# max-distance 600
(Instant AP)(RF dot11g Radio Profile)# csa-count 2
(Instant AP)(RF dot11g Radio Profile)# spectrum-monitor
(Instant AP)(RF dot11g Radio Profile)# end
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide rf dot11g-radio-profile | 179
Vue de la page 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 575 576

Commentaires sur ces manuels

Pas de commentaire