Dell W-IAP103 Guide de l'utilisateur télécharger pdf (Page 540)

540 | wlan auth-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide

Command/Parameter Description Range Default

IP-address>

source address and VLAN for

RADIUSpackets.

NOTE: Before configuring DRP IP

address, ensure that dynamic RADIUS

proxy is enabled, and a static Virtual

Controller IP is configured.

ip <IP-address>

Configures the IPaddress of the

RADIUS server

— —

key <key>

Configures a shared key

communicating with the external

RADIUS server.

— —

nas-id <NAS-ID>

Configures Network Attached Storage

(NAS) identifier strings for RADIUS

attribute 32, which is sent with RADIUS

requests to the RADIUS server.

— —

nas-ip <IP-address>

Configures the Virtual Controller IP

address as the NAS address which is

sent in data packets.

— —

port <port-name>

Configures the authorization port

number of the external RADIUS server.

— 1812

retry-count <count>

Configures the maximum number of

authentication requests that can be sent

to the server group.

1-5 3

rfc3576

Allows the W-IAPs to process RFC

3576-compliant Change of

Authorization (CoA) and disconnect

messages from the RADIUS server.

Disconnect messages cause a user

session to be terminated immediately,

whereas the CoA messages modify

session authorization attributes such as

data filters.

— Disabled

timeout <seconds>

Configures a timeout value in second to

determine when a RADIUS request

must expire.

The W-IAP retries to send the request

several times (as configured in the

Retry count), before the user gets

disconnected. For example, if the

Timeout is 5 seconds, Retry counter is

3, user is disconnected after 20

seconds.

1 to 30

seconds

5

no…

Removes the configuration. — —

1 2 ... 535 536 537 538 539 540 541 542 543 544 545 ... 575 576

Commentaires sur ces manuels

Pas de commentaire