Dell EMC AX4-5 Guide d'installation télécharger pdf (Page 7)

New features and changes

EMC AX4-5 Series Integrated Management Software Release Notes

New features and changes

 Increased support for Fibre Channel I/O

FLARE version 02.23.050.5.707 adds support for AX4-5F8 and

AX4-5SCF4, which provide four Fibre Channel ports per storage

processor.

If you are managing an AX4-5F8 or AX4-5SCF4 storage system, host

initiator records will be propagated to all ports on storage processor

A and storage processor B. Ports A-0, A-1, B-0, and B-1 will be listed

as Fibre while ports A-2, A-3, B-2, and B-3 will be listed as AUX, but

are just standard fibre ports.

AX4-5SCF4 to AX4-5F8 upgrades are supported. See the “Single-SP

to dual-SP upgrades” section under “

Technical notes” for

information on this procedure.

 RAID 6

FLARE version 02.23.050.5.7xx supports this new RAID type.

 SecureCLI commands:

The security and domain commands are supported for AX4-5

storage systems managed with Navisphere Express. See the

Navisphere Command Line Interface Reference Guide (P/N 300-003-628)

for details.

The getsnifffer command is supported for AX4-5 storage systems

managed with Navisphere Manager. See Navisphere Command Line

Interface Reference Guide (P/N 300-003-628) for details.

 Generic drive capacity support

This is also called auto drive recognition. This new feature allows

FLARE to automatically recognize a CLARiiON approved drive with

new capacity. It facilitates the future drives with unknown larger

capacity to be recognized on any shipping storage system.

 SAS drive support in all configurations

The standard configuration for AX4-5 storage systems was SATA

only; for this version the standard configuration includes SAS drives.

The expansion enabler is no longer required to support SAS drives.

1 2 3 4 5 6 7 8 9 10 11 12 ... 46 47

Pas de commentaire

Dell EMC AX4-5 Guide d'installation Page 7