Dell Inspiron 6000 Manuel d'utilisateur télécharger pdf (Page 11)

Back to Contents Page

 Display Assembly and Display Latch

DellInspiron™6000ServiceManual

Display Assembly

Display Bezel

Display Panel

Display Latch

Display Assembly



Removing the Display Assembly



1. Follow the instructions in "Preparing to Work Inside the Computer."



2. Remove the hinge cover.



3. Remove the keyboard.



4. Open the display all the way (180 degrees) so that it lies flat against your work surface.



5. Remove the four M2.5 x 5-mm screws (two on each side) that connect the display assembly to the computer.



6. Loosen the screw that connects the grounding wire to the system board.



7. Use the pull-tab to disconnect the display cable from the system board.



8. If a wireless Mini PCI card is installed, disconnect the antenna cables from the card.



9. Lift the display assembly from the computer.



CAUTION: Before you perform the following procedures, see the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

grounding wire screw

routing channel for antenna cables

display cable connector

system board connector

antenna cables (2)

routing channel for display cable

M2.5 x 5-mm screws (4)



1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Commentaires sur ces manuels

Pas de commentaire

Dell Inspiron 6000 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Carnets de notes Dell Inspiron 6000