Dell Inspiron 6000 Manuel d'utilisateur télécharger pdf (Page 15)

2. Reconnect the bottom flex-cable connector to the inverter connector.



3. Place the display panel inside the display cover.



4. Replace the eight M2 x 3-mm screws (four on each side) around the display panel.



5. Replace the display bezel.

Display Latch



Removing the Display Latch



1. Follow the instructions in "Preparing to Work Inside the Computer."



2. Remove the hinge cover.



3. Remove the keyboard.



4. Remove the display.



5. Remove the display bezel.



6. Slide the latch to the right and lift up.



7. Remove the spring that attaches the latch to the display panel.



Replacing the Display Latch



1. Replace the spring that attaches the latch to the display cover.



2. Align the latch with the display cover and slide the latch to the left to secure it into place.

CAUTION: Before you perform the following procedures, see the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

spring

display latch

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 44 45

Pas de commentaire

Dell Inspiron 6000 Manuel d'utilisateur Page 15