
Back to Contents Page
Internal Card With Bluetooth®Wireless Technology
DellInspiron™6000ServiceManual
Removing the Card
Replacing the Card
Removing the Card
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the battery.
3. Use a plastic scribe to pry the card door open.
4. Disconnect the card from the card door ribbon.
CAUTION: Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
NOTE: If you ordered an internal card with Bluetooth wireless technology with your computer, the card is already installed.
NOTICE: The card door has a ribbon that is connected to the internal card with Bluetooth wireless technology attached. Be careful when removing the
card door. Failure to do so could damage the ribbon cable and the Bluetooth card.
internal card with Bluetooth wireless technology
Commentaires sur ces manuels