Dell Inspiron 6000 Manuel d'utilisateur Page 44

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 45
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 43
Back to Contents Page
Video Card/Thermal-Cooling Assembly
DellInspiron™6000ServiceManual
Removing the Video Card/Thermal-Cooling Assembly
Replacing the Video Card/Thermal-Cooling Assembly
Removing the Video Card/Thermal-Cooling Assembly
The computer has either a video controller integrated on the system board or a video card/thermal-cooling assembly. An integrated video controller cannot be
removed from the system board.
To remove the video card/thermal-cooling assembly:
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the Mini PCI card (if applicable) and the optical drive.
3. Remove the hard drive.
4. Remove the hinge cover.
5. Remove the keyboard.
6. Remove the display assembly.
7. Remove the palm rest.
8. Loosen the two captive screws on the video card/thermal-cooling assembly.
9. Lift up the video card/thermal-cooling assembly to remove it from the system board.
Replacing the Video Card/Thermal-Cooling Assembly
1. Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.
CAUTION: Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTE: The video card/thermal-cooling assembly is a single unit. Do not remove the video card from the assembly.
1
video card/thermal-cooling assembly
2
captive screws (2)
3
system board connector
Vue de la page 43
1 2 ... 39 40 41 42 43 44 45

Commentaires sur ces manuels

Pas de commentaire