Dell 360 Manuel d'utilisateur télécharger pdf (Page 36)

36 Cards

If you are replacing a PCI Express x16 card, remove the installed card by

gently pulling the release lever away from the card until you release the

securing tab from the dent in the card.

Grasp the card by its top corners, and ease it out of its connector.

If you are permanently removing the card:

Install a filler bracket to cover the empty card slot.

CAUTION: Installing filler brackets in empty card-slot openings is necessary to

maintain FCC certification of the computer. The brackets also keep dust and dirt

out of your computer and maintain the airflow that cools your computer.

Follow the procedure in "After Working on Your Computer" on

page 17.

Uninstall the card’s driver. For instructions, see the documentation

that came with the card.

For more information on using the system setup program, see the

Dell

Tec hno lo g y Gu i d e

on your computer or ats

upport.dell.com.

Installing or Replacing a PCI or PCI Express Card in a Desktop Computer

NOTE: If applicable, see "Installing or Replacing a Card in the Optional Riser-Card

Cage" on page 52.

NOTE: If you are installing a card to replace one already installed in the computer,

you must first remove the installed card (see "Removing a PCI or PCI Express Card

From a Desktop Computer" on page 35 or "Removing a Card From the Optional Riser-

Card Cage" on page 50).

Follow the procedure in "Before Working on Your Computer" on page 9.

Remove the computer cover (see "Removing the Desktop Computer

Cover" on page 21).

Gently push the release lever on the card retention latch to pivot the latch

open. The latch remains in the open position.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 159 160

Pas de commentaire

Dell 360 Manuel d'utilisateur Page 36