Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 119)

omconfig: Managing Components Using the Instrumentation Service 119

omconfig system thrmshutdown

Use the omconfig system thrmshutdown command to configure a thermal shutdown action. A thermal

shutdown can be configured to occur when a temperature probe detects a temperature probe warning or

failure event.

Table 5-29 shows the valid parameters for the command.

Example Thermal Shutdown Commands

To trigger a thermal shutdown when a temperature probe detects a failure event, type:

omconfig system thrmshutdown severity=failure

To disable thermal shutdown so that an administrator has to initiate an omconfig system shutdown,

type:

omconfig system thrmshutdown severity=disabled

Table 5-29. Thermal Shutdown Parameters

name=value pair Description

severity=disabled | warning | failure disabled: Disable thermal shutdown. An administrator

must intervene.

warning: Perform a shutdown when a temperature warning

event is detected. A warning event occurs when any

temperature probe inside a chassis reads a temperature (in

degrees Celsius) which exceeds the maximum temperature

warning threshold.

failure: Perform a shutdown when a temperature failure

event is detected.

A failure event occurs when any temperature probe inside a

chassis reads a temperature (in degrees Celsius) that

exceeds the maximum temperature failure threshold.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 119