Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 164)

164 Using the Storage Management Service

omreport Virtual Disk Status

adisk=connectorID : targetID

| connectorID : enclosureID :

slotID

where connectorID:targetID is

the connector number and the

array disk number and

connectorID:enclosureID:slotID

is the connector number,

enclosure number, and slot

number.

For example: adisk=0:2 or

adisk=0:1:2

Displays the specified array disk

on the specified connector on

the controller.

Table 9-14. omreport Virtual Disk Commands

Required Command Levels (1, 2, 3) Optional name=value pairs Use

omreport storage vdisk Displays property information for

all virtual disks on all controllers.

controller=id

where id is the controller number.

For example: controller=0.

Displays all virtual disks on the

specified controller.

controller=id vdisk=id

where id is the controller number

and the virtual disk number. For

example: controller=0 vdisk=1.

Displays the specified virtual disk

on the controller.

Table 9-13. omreport Array Disk Commands (continued)

Required Command Levels (1, 2, 3) and

name=value pair

Optional name=value pairs Use

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 164