Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 149)

omconfig rac: Managing the Remote Access Controller 149

omconfig rac remote

Use the omconfig rac remote command to specify the remote features property values. Table 8-9 shows

the valid parameters for the command.

Example Command

The following example sets one name=value pair. Type:

omconfig rac remote floppytftpenable=true

The following message appears:

Command Successful. Please reset RAC card!

omconfig rac rmdialinuser

Use the omconfig rac rmdialinuser command to remove a dial-in user. Table 8-10 shows the valid

parameters for the command.

Table 8-9. omconfig rac remote

name=value pair Description

floppytftpenable=true | false true: Enables remote boot.

false: Disables remote boot.

floppytftpipaddr=<text> Sets the floppy TFTP address.

floppytftppath=<text> Sets the floppy TFTP path.

fwupdatetftpipaddr=<text> Sets the firmware TFTP address.

fwupdatetftppath=<text> Sets the directory path on the TFTP server where the

firmware update images reside.

Table 8-10. omconfig rac rmdialinuser

name=value pair Description

username=<text> Specifies the user name of entry which is to be deleted. If no

user name is specified, an index must be specified.

index=<n> Specifies the index of the entry which is to be deleted. If no

index is specified, a user name must be specified.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 149