Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 179)

Using the Storage Management Service 179

omconfig Blink Virtual Disk

Use the following omconfig command syntax to blink the array disks included in a virtual disk.

Complete Syntax

omconfig storage vdisk action=blink controller=id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these

values, enter omreport storage controller to display the controller IDs and then enter omreport storage

vdisk controller=ID to display the IDs for the virtual disks attached to the controller.

Example Syntax

For example, to blink the array disks in virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=blink controller=1 vdisk=4

omconfig Unblink Virtual Disk

Use the following omconfig command syntax to unblink the array disks included in a virtual disk.

Complete Syntax

omconfig storage vdisk action=unblink controller=id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these

values, enter omreport storage controller to display the controller IDs and then enter omreport storage

vdisk controller=ID to display the IDs for the virtual disks attached to the controller.

action=unmirror controller=id vdisk=id

action=assigndedicatedhotspare controller=id vdisk=id adisk=

<ADISKID> assign=<yes | no>

action=deletevdisk controller=id vdisk=id [force=yes]

action=format controller=id vdisk=id

action=reconfigure controller=id vdisk=id raid=<c | r0 | r1 | r1c | r5 |

r10> size=<size> adisk=<ADISKID>

action=changepolicy controller=id vdisk=id [readpolicy=<ra | nra | ara |

rc | nrc> | writepolicy=<wb | wt | wc | nwc | fwb> | cachepolicy=<d |

c>]

action=rename controller=id vdisk=id

Table 9-22. omconfig Manage Virtual Disk Commands (continued)

Required Command Levels

(1, 2, 3)

Optional name=value pairs

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 179