Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 147)

omconfig rac: Managing the Remote Access Controller 147

omconfig rac network

Use the omconfig rac network command to specify network parameter values. Table 8-7 shows the valid

parameters for the command.

Example Command

The following example sets one name=value pair. Type:

omconfig rac network ippaddr=123.169.555.216

The following message appears:

Command Successful. Please reset RAC card!

Table 8-7. omconfig rac network

name=value pair Description

ipaddr=<text> Sets the IP address, which must be specified in dotted-decimal notation.

subnetmask=<text> Sets the subnet mask, which must be specified in dotted-decimal notation.

gateway=<text> Sets the gateway, which must be specified in dotted-decimal notation.

nicenable=true | false true: Enables the NIC.

false: Disables the NIC.

dhcpenable=true | false true: Enables the DHCP.

false: Disables the DHCP.

smtpaddr=<text> Sets the SMTP address, which must be specified in dotted-decimal

notation.

smtpenable=true | false true: Enables the SMTP.

false: Disables the SMTP.

dialinenable=true | false true: Enables the dial-in communications.

false: Disables the dial-in communications.

dialindhcpenable=true | false true: Enables the dial-in dynamic host configuration protocol

(DHCP).

false: Disables the dial-in dynamic host configuration protocol

(DHCP).

dialinpaddr=<text> Sets the base IP address, which must be specified in dotted-decimal

notation.

dialinauthtype=any | encrypted Sets the type of authentication required.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 147