Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 200)

200 Using the Storage Management Service

omconfig Enable Enclosure Alarm

Use the following omconfig command syntax to enable the enclosure alarm:

Complete Syntax

omconfig storage enclosure action=enablealarm controller=id

enclosure=<ENCLOSUREID>

where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.

Example for SCSI, SATA, and ATA Controllers:

For example, to enable the alarm on the enclosure attached to connector 2 on controller 1, enter:

omconfig storage enclosure action=enablealarm controller=1

enclosure=2

Example for SAS Controllers:

For example, to enable the alarm on enclosure 2 attached to connector 1 on controller 1, enter:

omconfig storage enclosure action=enablealarm controller=1

enclosure=1:2

action=setassetname controller=id enclosure=<ENCLOSUREID>

assetname=<string>

action=settempprobes controller=id enclosure=<ENCLOSUREID>

index=id minwarn=n maxwarn=n

action=resettempprobes controller=id enclosure=

<ENCLOSUREID> index=id

action=setalltempprobes controller=id

enclosure=<ENCLOSUREID> minwarn=n

maxwarn=n

action=resetalltempprobes controller=id

enclosure=<ENCLOSUREID>

action=blink controller=id

enclosure=<ENCLOSUREID>

Table 9-26. omconfig Enclosure Commands (continued)

Required Command Levels (1, 2, 3) Optional name=value pairs

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 200