Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 188)

188 Using the Storage Management Service

Example Syntax

For example, to change the read policy of virtual disk 4 on controller 1 to no-read-ahead, enter:

omconfig storage vdisk action=changepolicy controller=1 vdisk=4

readpolicy=nra

omconfig Rename Virtual Disk

Use the following omconfig command syntax to rename a virtual disk.

NOTE: On a CERC SATA 1.5/2s controller, you cannot change the default name of a virtual disk.

Complete Syntax

action=rename controller=id vdisk=id name=<string>

where id is the controller ID and virtual disk ID as reported by the omreport command and <string> is the

new name for the virtual disk. To obtain the values for controller ID and virtual disk ID, enter omreport

storage controller to display the controller IDs and then enter omreport storage vdisk controller=ID to

display the IDs for the virtual disks attached to the controller.

Example Syntax

For example, to rename virtual disk 4 on controller 1 to vd4, enter:

omconfig storage vdisk action=rename controller=1 vdisk=4 name=vd4

omconfig Array Disk Commands

The following sections provide the omconfig command syntax required to execute array disk tasks.

Table 9-23. omconfig Array Disk Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage adisk

action=blink controller=id adisk=<ADISKID>

action=unblink controller=id adisk=<ADISKID>

action=remove controller=id adisk=<ADISKID>

action=initialize controller=id adisk=<ADISKID>

action=offline controller=id adisk=<ADISKID>

action=online controller=id adisk=<ADISKID>

action=assignglobalhotspare controller=id adisk=<ADISKID>

assign=<yes|no>

action=rebuild controller=id adisk=<ADISKID>

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 188