Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 204)

204 Using the Storage Management Service

Example Syntax

For example, you may want to reset the thresholds for temperature probe 3 to the default values.

Example for SCSI, SATA, and ATA Controllers:

In this example, temperature probe 3 resides in the enclosure attached to connector 2 on controller 1. To

reset the thresholds for temperature probe 3 to the default values, enter:

omconfig storage enclosure action=resettempprobes controller=1

enclosure=2 index=3

omconfig Set All Temperature Probe Thresholds

Use the following omconfig command syntax to set the minimum and maximum warning temperature

thresholds for all temperature probes in the enclosure.

NOTE: This command is not supported on SCSI RAID controllers.

Complete Syntax

omconfig storage enclosure action=setalltempprobes controller=id

enclosure=<ENCLOSUREID> minwarn=n maxwarn=n

where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.

Example Syntax

For example, you may want to specify the minimum and maximum warning thresholds for all

temperature probes to 10 and 40

° Celsius.

Example for SAS Controllers

In this example, the temperature probes reside in enclosure 3 attached to connector 2 on controller 1. To

set the thresholds for all temperature probes to 10 and 40

° Celsius, enter:

omconfig storage enclosure action=setalltempprobes controller=1

enclosure=2:3 minwarn=10 maxwarn=40

omconfig Reset All Temperature Probe Thresholds

Use the following omconfig command syntax to reset the minimum and maximum warning temperature

thresholds back to their default value for all temperature probes in the enclosure.

NOTE: This command is not supported on SCSI RAID controllers.

Complete Syntax

omconfig storage enclosure action=resetalltempprobes controller=id

enclosure=<ENCLOSUREID>

where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 204