Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 177)

Using the Storage Management Service 177

omconfig Clear Foreign Configuration

Use the following omconfig command syntax to clear or delete all virtual disks that reside on array disks

that are newly attached to the controller.

Complete Syntax

omconfig storage controller action=clearforeignconfig controller=id

where id is the controller ID as reported by the omreport storage controller command.

Example Syntax

For example, to clear foreign configurations on controller 1, enter:

omconfig storage controller action=clearforeignconfig controller=1

omconfig Set Patrol Read Mode

Use the following omconfig command syntax to set the patrol read mode for the controller.

Complete Syntax

omconfig storage controller action=setpatrolreadmode controller=id

mode=manual|auto|disable

where id is the controller ID as reported by the omreport storage controller command.

Example Syntax

For example, to set the patrol read on controller 1 to manual mode, enter:

omconfig storage controller action=setpatrolreadmode controller=1

mode=manual

omconfig Start Patrol Read

Use the following omconfig command syntax to start the patrol read task on the controller.

Complete Syntax

omconfig storage controller action=startpatrolread controller=id

where id is the controller ID as reported by the omreport storage controller command.

Example Syntax

For example, to start the patrol read task on controller 1, enter:

omconfig storage controller action=startpatrolread controller=1

NOTE: To be able to start patrol read, the current patrol read mode should be set to "Manual."

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 177