Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur télécharger pdf (Page 150)

150 omconfig rac: Managing the Remote Access Controller

Example Command

The following example sets one name=value pair. Type:

omconfig rac rmdialinuser username=jdoe

The following message appears:

Command Successful. Please reset RAC card!

omconfig rac rmdialoutuser

Use the omconfig rac rmdialoutuser command to remove a dial-out user. Table 8-11 shows the valid

parameters for the command.

Example Command

The following example sets one name=value pair. Type:

omconfig rac rmdialoutuser username=jdoe

The following message appears:

Command Successful. Please reset RAC card!

omconfig rac rmsnmptrap

Use the omconfig rac rmsnmptrap command to remove an SNMP trap. Table 8-12 shows the valid

parameters for the command.

Table 8-11. omconfig rac rmdialoutuser

name=value pair Description

username=<text> Specifies the user name of entry which is to be deleted. If no user name is

specified, an index must be specified.

index=<n> Specifies the index of the entry which is to be deleted. If no index is

specified, a user name must be specified.

Table 8-12. omconfig rac rmsnmptrap

name=value pair Description

ipaddr=<text> Specifies the IP address of entry which is to be deleted. This value must

be specified in dotted-decimal notation. If no IP address is specified, an

index must be specified.

index=<n> Specifies the index of the entry which is to be deleted. If no index is

specified, an IP address must be specified.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 247 248

Pas de commentaire

Dell OpenManage Server Administrator Version 5.0 Manuel d'utilisateur Page 150