Dell PowerVault ML6000 Manuel d'utilisateur télécharger pdf (Page 81)

Chapter 5 Configuring Your Library

Configuring I/E Station Slots

Dell PowerVault ML6000 User’s Guide 81

Configuring I/E Station Slots

I/E station slots are used to import and export tape cartridges into and

out of the library without disrupting normal library operations. The

Setup Wizard: I/E Station screens allow you to configure I/E station slots.

Administrators can also configure these slots on either the operator panel

or the Web client.

Each 5U Library Control Module contains six I/E station slots, and each

9U Library Expansion Module contains 12 I/E station slots. The available

library configurations support a minimum of six I/E slots in the 5U

library to a maximum of 54 I/E slots in the 41U library configuration. You

can also choose to configure zero I/E station slots and use all slots in all

I/E stations for tape cartridge storage. For more information on

configuring zero I/E slots, see Configuring Zero I/E Station Slots on

page 83.

Each I/E station (6-slot or 12-slot) is configured as a complete unit. When

configuring an I/E station, configure all the slots in the I/E station the

same way: all storage or all I/E slots.

If the library consists of an ML6010 CM, all six I/E station slots must be

configured either as storage or as I/E station slots. The ML6020 CM

consists of a 5U Library Control Module (with six I/E station slots) and a

9U Library Expansion Module (with 12 I/E station slots). All 12 of the

slots in the 9U Library Expansion Module must be configured the same

way, as either I/E station slots or storage slots. Therefore, the ML6020

CM can contain a minimum of six and a maximum of 18 dedicated I/E

station slots. Table 4 lists the number of I/E station slots available per

library for all base library configurations.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 437 438

Pas de commentaire

Dell PowerVault ML6000 Manuel d'utilisateur Page 81