ip dhcp
ip dhcp <dhcp_profile>
bid <bid>
client-count <idx>
default-router <default_router>
dhcp-relay
dhcp-server <dhcp_server>
disable-split-tunnel
dns-server <dns_server>
domain-name <domain-name>
exclude-address <exclude_address>
host <mac>
ip-range <start_IP> <end_IP>
lease-time <lease_time>
option <option_type> <option_value>
option82 alu
reserve {first <count>| last <count>}
server-type <server_type>
server-vlan <idx>
subnet <subnet>
subnet-mask <Subnet-Mask>
vlan-ip <VLAN_IP> mask <VLAN mask>
no…
Description
This command configures DHCP assignment modes and scopes for Instant network.
Syntax
Parameter Description Range Default
ip dhcp <profile>
Creates a DHCP profile with a unique
name.
— —
bid <bid>
Defines the branch ID.
NOTE: You can allocate multiple
branch IDs (BID) per subnet. The W-IAP
generates a subnet name from the
DHCP IP configuration, which the
controller can use as a subnet identifier.
If static subnets are configured in each
branch, all of them are assigned the
with BID 0, which is mapped directly to
the configured static subnet.
— —
client-count <idx>
Defines the number of clients allowed
per DHCP branch.
NOTE: The client count configured for a
branch determines the use of IP
addresses from the IP address range
defined for a DHCP scope. For
example, if 20 IP addresses are
available in an IP address range
configured for a DHCP scope and a
client count of 9 is configured, only a
few IP addresses (in this example, 9)
from this range will be used and
— —
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide ip dhcp | 137
Commentaires sur ces manuels